meeting date: 23 aug 2005
attending: Arpad Muranyi, Todd Westerhoff, Ian Dodd, Bob Ross, Ken Willis, Sam Chitwood
-------------
AR  Review:
AR: Arpad continue work on library
==> New attachement for this meeting
AR: Ian find out if Mentor receiver can be public
==> In process
AR: All read "SPICE Compatibility" section of:
    http://www.sisoft.com/ibis-macro/docs/verilog_ams_lrm_2.2.pdf
-------------
Arpad's new library additions:
   - Charge-conserving capacitor, inductor can't be effectively implemented because Verilog-AMS doesn't allow
     parameters to me passed at run time.
   - Ran into issues with DC operating point and transient simulations.  Section 5.3 of LRM discusses how values are retained 
     during simulation.  Arpad worked through serveral iterations of models before arriving at a set of equations that worked
     across DC and transient conditions.
     
Mentor serial receiver:
   - Mentor's model is based on work for a specific vendor, amd Mentor Marketing isn't comfortable sharing it.
   - Ian agreed to define a generic high level template for a serial receiver with clock recovery
AR: Ian to continue researching receiver architectures and come up with a generic template

Verilog-AMS LRM / Spice compatibility
   - Verilog-A discussions of Spice compatibility at Accelera have dropped off
   - Arpad will contuinue to monitor
   
Cadence macro-modeling templates
   - Cadence wants to wait until after building block library is complete to support pre-emphasis buffer
   - Once pre-emphasis template and building blocks are complete, Cadence will consider releasing additional templates
   
Passing parameters
   - Verilog-A will not allow parameters to be passed at runtime.  To get around this, we can implement building blocks 
     that have an additional pin - a "control port" that passes a value to be interpreted as a parameter.  Do we want to
     create building blocks like this? 
AR: Arpad to post a note to the reflector to continue this discussion
   
What's missing in the current library
   - Controlled sources
   - Table-driven sources
   - Triggerable (time-controlled) sources
   - If/then/else equations
   - Simulation time
   - Previously computed values
   - Calculation of 1st derivative of voltage or current

DesignCon IBIS Summit
   - Current presentation plan is to review basic strategy (building block library), outline the proposed contents of the
     intial library, and show the pre-emphasis buffer from the previous Summit, modified to call out the building blocks
     from the standard library
   - Arpad will continue work on the building block library and reformatting the pre-emphasis buffer to call out data from
     the library
   - Todd/Mike to propose and develop paper for the IBIS Summit.
AR: Todd/Mike to propose paper for IBIS Summit and develop presentation

-------------
Next meeting: Tuesday August 23, 2005.
